Beam Remote Codes: Guide To Program Beam Universal Remote

Last Updated on October 5, 2023 by Ron D. Morgan

The Beam remote control is a Smart Universal remote control brand that allows you to sync your remote to a device seamlessly.

Beam remote control serves as a 6-in-1 remote. Being that the remote can be synced to your TV, Soundbar, DVD player, Satellite/ cable TV, and Blu-ray.

As a smart remote control, the Beam remote can also be used to program another remote. The Beam remote mirrors the other remote control. This can only work on IR powered remote control. Also, the Beam app serves as a replacement remote.

Just like any other universal remote, you need to program the Beam remote to your device before use. This process requires the Beam universal remote codes. That is if you are to program the remote control directly and not from the app.

This post outlines the Beam universal remote codes. Also, you will find a mini-guide on how to program the Beam remote control to your device.

All-in-One Beam Universal Remote Codes

  • 0002
  • 0086
  • 0004
  • 0009
  • 0008
  • 0091
  • 0133
  • 1181
  • 3099

Beam Universal Remote Codes For All TV Brands

AOC: 2091, 2063, 4050, 4069

Apex: 2497, 2499, 2424, 2431, 1796

Citizen: 0004, 0008, 0009, 0061, 0042

Changhong: 2431

Coby: 1796, 2356, 1804, 1863, 2448

Cutis Mathaes: 0105, 3022, 2465, 1847, 0004

Daewoo: 3023, 0004, 0126, 0014, 0127

Daytron: 0004, 0009

Duraband: 0135, 0198, 0157, 0217, 0189

Dynex: 1171, 2461, 2351, 0135

Element: 3538, 1025, 2468, 1820

Emerson: 2324, 3110, 2454, 2455, 2442

Envision: 2504, 2095, 0004, 0074, 0009

Funai: 1877, 0198, 1949, 0051, 0042

Gateway: 2116, 0046

GE: 2433, 0198, 0214, 0048, 0004

Goldstar: 0006, 2117, 3107, 1949, 0338

Haier: 2502, 0217, 0077, 3001, 0216

Hisense: 3537, 1173, 0182, 2060, 2463

Hitachi: 0088, 0419, 0012, 0061, 0091

Ilo: 2451, 0189, 2012, 2141, 1024

Insignia: 13031, 0135, 0133, 0199, 1160

JBL: 0062

JC Penney: 0004, 2057, 0015, 0087, 0008

Jensense: 0133, 0004, 0009, 4086

JVC: 2446, 0160, 0065, 0026, 0067

LG: 3534, 0004, 2098, 0155, 2254

Magnavox: 2477, 0899, 1174, 1130, 1133

Mitsubishi: 2086, 0151, 0005, 0004

Memorex: 0051, 0004, 2103, 0009, 2228

NEC: 0004, 005, 0009, 0010, 1142

Olevia: 2347, 1012, 1156, 2459, 1142

ONN/ROKU: 3552, 3544, 3545, 3543, 2357

Panasonic: 3005, 2484, 0381, 24770, 3024

Philips: 3535, 1154, 2477, 2495, 1141

Philco: 0183, 0198, 0004, 0075, 0008

Pioneer: 0185, 0009, 0072, 0004, 1879

Polaroid: 2099, 1025, 0214, 2466, 2063

Proscan: 2467, 2480, 1174, 0000, 1173

Quasar: 0170, 1820, 2057, 0070, 3024

Radio Shack: 0004, 0095, 1949, 0048

RCA: 0048, 3027, 2433, 0004, 2357

Realistic: 0004, 0095, 1949, 0048, 2357

Samsung: 3528, 2481, 2482, 2355, 0007

Sansui:2466, 2103, 0189, 1181, 2456

Sanyo: 0110, 2458, 1181, 2457, 0012

Sharp: 2464, 2491, 0223, 2352, 2489

Sony: 3536, 2483, 2462, 2438, 0002, 0382, 2938

Soundesign: 0004, 0008, 0009, 0051, 0042, 2384, 2834

Sylvania: 0187, 2324, 0135, 2426, 2364, 2834

TCL/ ROKU: 3532, 2492, 2479, 3004

Toshiba: 0109, 2479, 0159, 2103, 0095

Vizio: 3533, 2472, 2045, 2501, 2473

Westinghouse: 2480, 3098, 3099, 0013, 2062, 2060, 2061

Yamaha: 0004, 0005, 0009, 3024, 0172, 0283

Zenith: 2492, 2459, 033, 0381, 0003, 2384,2034, 2119

How To Program A Beam Universal Remote Control

. Go through the codes and find the code for your TV brand. Copy down the code and continue with the steps below.

. Hold your remote close to your TV, press and hold the ‘Program’ button on your remote.

. Release the button after the tiny LED lights up, and press the component button. For this instance, the component is the TV button.

. The LED will blink once. This shows the remote is in programming mode. Enter the 4-digit codes for your TV brand using the number buttons on your remote.

. Once you get the right code, the LED light will stop blinking.

. Press the ‘Power’ button again to test the remote. If it works, it means you’ve successfully programmed your remote.

Program A Beam Universal Remote Control To Another Remote

The other option is to program your original remote to mirror your Beam remote. This only works with remote controls that use IR commands. Follow the steps below to complete the process.

. Press and hold the ‘Program’ button on your remote until the tiny LED turns on.

. Press the component button for the device you want to program. In this instance, the component button is the ‘TV’ button. The tiny LED light will blink.

. Enter the code 8-8-8-8 using the number buttons on your remote. This activates the pairing mode.

. Hold the original remote control very close to your Beam universal remote. The distance between the two remote controls should be maxed at 1.0 inches apart.

. On your Beam remote, press the buttons you want to program to the original remote. For each button, hold down the button for a couple of seconds until you hear the remote beep.

. On the original remote, hold down the same button you held on the Beam remote. Continue to hold down the button until the beep sound on the Beam remote.

. When you are done, finally press the ‘Program’ button on the Beam remote to save the settings.

Conclusion

So far, this post has outlined the Beam remote codes and a mini-guide on how to program the Beam universal remote. It also includes a step to step process on how to program another remote control to your Beam remote.

Note that there are some buttons you can’t mirror on the Beam remote. That includes the Program button, component buttons, FAV button, custom buttons, and activity buttons.